DESCRIPTION:
Lifting yoke blade. A lifting yoke for handling 61.5m blades during assembling and disassembling of blades.

WLL:
22 ton.

PROJECTNR.:
LT485-A8

APPROVED FOR:
European Union (EU).











.

DESCRIPTION:
Blade frame 61.5m. A Blade frame for stacking and transport of 61.5 m blades. Transport in standard container. Can stack 3 blades.

WLL:
20 ton.

PROJECTNR.:
LT486-A8

APPROVED FOR:
European Union (EU).











.

DESCRIPTION:
A spreader beam that is used to lift
windturbine blades.


WLL:
71 ton.

PROJECTNR.:
LT451-A8

APPROVED FOR:
European Union (EU), USA.













.

DESCRIPTION:
Yoke for lifting a B52 blade. The yoke is used for mounting a single blade to a hub. A wire system steer both angular position and horizontal position of the yoke. A sliding system can tilt the blade 20º when fitting the blade flange on to the hub flange.

WLL:
19.5 ton.

PROJECTNR.:
LT379-A8

APPROVED FOR:
European Union (EU), Japan, USA, Australia, New Zealand.






.

DESCRIPTION:
B45 rotor yoke. Used to mount single blades on a hub that is positioned on ground in order to perform a complete rotor lift on “site”. To assemble the blade and hub the blade has to be turned 90º.

WLL:
13 ton.

PROJECTNR.:
LT351-A3

APPROVED FOR:
European Union (EU), Australia, Japan, New Zealand and USA.








.

DESCRIPTION:
Blade yoke B45 turning. Yoke for lifting a B45 blade. The yoke is used for mounting a single blade to a hub. A wire system steer both angular position and horizontal position of the yoke. A sliding system can tilt the blade 20º when fitting the blade flange on to the hub flange.

WLL:
12.5 ton.

PROJECTNR.:
LT312-A4

APPROVED FOR:
European Union (EU), Japan, USA, Australia, New Zealand.






.

DESCRIPTION:
Lifting yoke for wind turbine blades. Used when a single blade is mounted horizontally on the hub. When the blade is lifted and attached to the hub the yoke is released from the blade by use of a remote control.

WLL:
10 ton.

PROJECTNR.:
LT202-A3

APPROVED FOR:
European Union (EU).








.

DESCRIPTION:
Service platform for wind turbines
BWM 3500. The platform is used for inspection and repairs of the blades and tower on a wind turbine and operated by two persons.

WLL:
300 kg.

PROJECTNR.:
LT181-A3

APPROVED FOR:
European Union (EU).










.