DESCRIPTION: Davit crane. 2.7m reach. For lifting of objects to base of offshore wind turbine from supply ship. Integrated hoist. All mechanical parts - brake, motor, slip clutch, gearbox - are enclosed in oil chamber to prevent corosion. Manual slew drive for turning of the crane.
WLL: 650 kg.
PROJECTNR.: LT850
APPROVED FOR: European Union (EU). Off-shore (IMO).
APPROVED BY: DNV.
.
DESCRIPTION: RTG (Rubber Tyred Gantry) Crane.
WLL: 130 ton.
PROJECTNR.: LT847
.
DESCRIPTION: Davit. 2 meter reach. Designed for lifting tools and other equipment from ship to the foundation of an offshore wind turbine. Tiltable for easy access to hoist.
WLL: 800 kg.
PROJECTNR.: LT592
APPROVED FOR: European Union (EU). Off-shore (IMO).
.
DESCRIPTION: Davit crane on floating base with slew drive. Several lifting points. Self locking rotation. Slew drive and integrated winch are optional.
WLL: 1.5 t.
PROJECTNR.: LT556
APPROVED FOR: European Union (EU). Off-shore (IMO).
.
DESCRIPTION: LT Carrier Gantry. Moves any component that can be lifted in one point. Can reach over a flatbed truck, to load and unload. Drives both in parallel mode in any direction - or in normal mode where the carrier turns around a line through the center of the carrier. Battery driven which makes the noise emission extremely low, and allows the carrier to drive inside the factory.
WLL: 90 ton.
PROJECTNR.: LT494
APPROVED FOR: European Union (EU).
.
DESCRIPTION: LT Carrier Gantry. Moves any component that can be lifted in 1 point. Can reach over a flatbed truck, to load and unload. Drives both in parallel mode in any direction - or in normal mode where the carrier turns around a line through the center of the carrier. Battery driven which makes the noise emission extremely low, and allows the carrier to drive inside the factory.
WLL: 80 ton.
PROJECTNR.: LT194
APPROVED FOR: European Union (EU).
.
DESCRIPTION: Davit crane. The Davit crane is mounted permanently on the foundation of the 3MW offshore wind turbine. The crane is used for lifting tools and other equipment from ship to the foundation of the offshore wind turbine.
WLL: 800 kg.
PROJECTNR.: LT305
APPROVED FOR: European Union (EU), USA, Off-shore (IMO).
.
DESCRIPTION: Internal Crane for NM2000 . A small crane used to lift a gear cover plate so the high speed shaft can be changed in the turbine. The crane is constructed to be assembled inside the wind turbine.
