DESCRIPTION:
36 meter Spreader beam. Designed for erecting tower sections. The spreader beam can lift in 3 different configurations. Changed from one lifting configuration to another within 5 minutes.

WLL:
61 ton.

PROJECTNR.:
LT806

APPROVED FOR:
European Union (EU), USA.









.

DESCRIPTION:
Davit. 2 meter reach. Designed for lifting tools and other equipment from ship to the foundation of an offshore wind turbine. Tiltable for easy access to hoist.

WLL:
800 kg.

PROJECTNR.:
LT592

APPROVED FOR:
European Union (EU). Off-shore (IMO).









.

DESCRIPTION:
Main shaft fixture 2.3MW Siemens. Designed for changing a gearbox without dismounting the rotor. Part of Liftra's broad range of fixtures for main shafts.

PROJECTNR.:
LT586
















.

DESCRIPTION:
Davit crane on floating base with slew drive. Several lifting points.
Self locking rotation. Slew drive and integrated winch are optional.

WLL:
1.5 t.

PROJECTNR.:
LT556

APPROVED FOR:
European Union (EU). Off-shore (IMO).










.

DESCRIPTION:
Lifting yoke blade. A lifting yoke for handling 61.5m blades during assembling and disassembling of blades.

WLL:
22 ton.

PROJECTNR.:
LT485-A8

APPROVED FOR:
European Union (EU).











.

DESCRIPTION:
Fixture for main shaft. Designed for changing a gearbox without dismounting the rotor.
Fits NEG MICON NM1500-1650 and NM64-82 and VESTAS V82. Part of Liftra's broad range of fixtures for main shafts.

WLL:
93 ton.

PROJECTNR.:
LT019-2

APPROVED FOR:
USA.








.

DESCRIPTION:
Adjustment yoke for drive train. A lifting yoke for lifting and adjusting drive train for wind turbine.

WLL:
77 ton.

PROJECTNR.:
LT481-A8

APPROVED FOR:
European Union (EU).












.

DESCRIPTION:
Lifting bracket for the bottom of a tower. Used when turning the tower from horizontal to vertical.

WLL:
30 ton.

PROJECTNR.:
LT395-A8

APPROVED FOR:
European Union (EU).












.

DESCRIPTION:
Fixture for change of gearbox on MM. Fixture for use in nacelle during replacement of gearbox.

WLL:
175 ton.

PROJECTNR.:
LT393-A7

APPROVED FOR:
European Union (EU), USA.












.

DESCRIPTION:
Hub yoke for NM2000/72. The yoke is used when a complete hub is mounted/dismounted to the nacelle. The hub tilts 6º during lift to ensure the top flanges of the hub and nacelle will connect smoothly.

WLL:
45 ton.

PROJECTNR.:
LT382-A4

APPROVED FOR:
European Union (EU).









.

DESCRIPTION:
Yoke for lifting a B52 blade. The yoke is used for mounting a single blade to a hub. A wire system steer both angular position and horizontal position of the yoke. A sliding system can tilt the blade 20º when fitting the blade flange on to the hub flange.

WLL:
19.5 ton.

PROJECTNR.:
LT379-A8

APPROVED FOR:
European Union (EU), Japan, USA, Australia, New Zealand.






.

DESCRIPTION:
B45 rotor yoke. Used to mount single blades on a hub that is positioned on ground in order to perform a complete rotor lift on “site”.  To assemble the blade and hub the blade has to be turned 90º.

WLL:
13 ton.

PROJECTNR.:
LT351-A3

APPROVED FOR:
European Union (EU), Australia, Japan, New Zealand and USA.








.

DESCRIPTION:
Transport frame 5MW tower sections. Used during transport on both ship and lorry. Furthermore the frame system is used as lifting equipment during erection on site of the 5MW tower.

WLL:
220 ton, 140 ton (when used during transport with transport adapter mounted).

PROJECTNR.:
LT325-A8

APPROVED FOR:
European Union (EU),
Offshore (IMO).






.

DESCRIPTION:
Blade yoke B45 turning. Yoke for lifting a B45 blade. The yoke is used for mounting a single blade to a hub. A wire system steer both angular position and horizontal position of the yoke. A sliding system can tilt the blade 20º when fitting the blade flange on to the hub flange.

WLL:
12.5 ton.

PROJECTNR.:
LT312-A4

APPROVED FOR:
European Union (EU), Japan, USA, Australia, New Zealand.






.

DESCRIPTION:
Davit crane.  The Davit crane is mounted permanently on the foundation of the 3MW offshore wind turbine. The crane is used for lifting tools and other equipment from ship to the foundation of the offshore wind turbine.

WLL:
800 kg.

PROJECTNR.:
LT305-A8

APPROVED FOR:
European Union (EU), USA, Off-shore (IMO).







.

DESCRIPTION:
Internal Crane for NM2000 . A small crane used to lift a gear cover plate so the high speed shaft can be changed in the turbine.
The crane is constructed  to be assembled inside the wind turbine.

WLL:
2.2 ton.

PROJECTNR.:
LT227-A2

APPROVED FOR:
European Union (EU).









.

DESCRIPTION:
Lifting yoke for wind turbine blades. Used when a single blade is mounted horizontally on the hub. When the blade is lifted and attached to the hub the yoke is released from the blade by use of a remote control.

WLL:
10 ton.

PROJECTNR.:
LT202-A3

APPROVED FOR:
European Union (EU).








.

DESCRIPTION:
Lifting yoke for 5 MW hub.

WLL:
130 ton.

PROJECTNR.:
LT192-A4

APPROVED FOR:
European Union (EU).














.

DESCRIPTION:
Service platform for wind turbines
BWM 3500. The platform is used for inspection and repairs of the blades and tower on a wind turbine and operated by two persons.

WLL:
300 kg.

PROJECTNR.:
LT181-A3

APPROVED FOR:
European Union (EU).










.