DESCRIPTION:
Lifting yoke blade. A lifting yoke for handling 61.5m blades during assembling and disassembling of blades.

WLL:
22 ton.

PROJECTNR.:
LT485-A8

APPROVED FOR:
European Union (EU).











.

DESCRIPTION:
Adjustment yoke for drive train. A lifting yoke for lifting and adjusting drive train for wind turbine.

WLL:
77 ton.

PROJECTNR.:
LT481-A8

APPROVED FOR:
European Union (EU).












.

DESCRIPTION:
A spreader beam that is used to lift
windturbine blades.


WLL:
71 ton.

PROJECTNR.:
LT451-A8

APPROVED FOR:
European Union (EU), USA.













.

DESCRIPTION:
Bridge yoke. A bridge yoke that is designed for continuous rotation of a load.

WLL:
91 ton.

PROJECTNR.:
LT409-A8

APPROVED FOR:
European Union (EU).












.

DESCRIPTION:
Lifting bracket for the bottom of a tower. Used when turning the tower from horizontal to vertical.

WLL:
30 ton.

PROJECTNR.:
LT395-A8

APPROVED FOR:
European Union (EU).












.

DESCRIPTION:
Yoke for lifting a B52 blade. The yoke is used for mounting a single blade to a hub. A wire system steer both angular position and horizontal position of the yoke. A sliding system can tilt the blade 20º when fitting the blade flange on to the hub flange.

WLL:
19.5 ton.

PROJECTNR.:
LT379-A8

APPROVED FOR:
European Union (EU), Japan, USA, Australia, New Zealand.






.

DESCRIPTION:
B45 rotor yoke. Used to mount single blades on a hub that is positioned on ground in order to perform a complete rotor lift on “site”. To assemble the blade and hub the blade has to be turned 90º.

WLL:
13 ton.

PROJECTNR.:
LT351-A3

APPROVED FOR:
European Union (EU), Australia, Japan, New Zealand and USA.








.

DESCRIPTION:
Transport frame 5MW tower sections. Used during transport on both ship and lorry. Furthermore the frame system is used as lifting equipment during erection on site of the 5MW tower.

WLL:
220 ton, 140 ton (when used during transport with transport adapter mounted).

PROJECTNR.:
LT325-A8

APPROVED FOR:
European Union (EU),
Offshore (IMO).






.

DESCRIPTION:
Blade yoke B45 turning. Yoke for lifting a B45 blade. The yoke is used for mounting a single blade to a hub. A wire system steer both angular position and horizontal position of the yoke. A sliding system can tilt the blade 20º when fitting the blade flange on to the hub flange.

WLL:
12.5 ton.

PROJECTNR.:
LT312-A4

APPROVED FOR:
European Union (EU), Japan, USA, Australia, New Zealand.






.

DESCRIPTION:
Lifting yoke for wind turbine blades. Used when a single blade is mounted horizontally on the hub. When the blade is lifted and attached to the hub the yoke is released from the blade by use of a remote control.

WLL:
10 ton.

PROJECTNR.:
LT202-A3

APPROVED FOR:
European Union (EU).








.

DESCRIPTION:
Lifting yoke for 5 MW hub.

WLL:
130 ton.

PROJECTNR.:
LT192-A4

APPROVED FOR:
European Union (EU).














.

DESCRIPTION:
Hook for flange. The hook is designed to fit the flange of a tower. The hook has an extra support beam to decrease the surface pressure on the flange when lifting.

WLL:
50 ton.

PROJECTNR.:
LT135-A1

APPROVED FOR:
European Union (EU).










.

DESCRIPTION:
Lifting yoke for concrete wall. Handling concrete walls of different sizes. The lifting yoke function with a gantry crane system.

WLL:
8 ton.

PROJECTNR.:
LT403-A8

APPROVED FOR:
European Union (EU).











.