DESCRIPTION: Turning of hub 2MW and 3MW. Used to turn the 2MW hub and 3MW hub while fitted on transport frame. 180º turn of 2MW. 90º turn of 3MW.
WLL: 28 ton.
PROJECTNR.: LT372
APPROVED FOR: European Union (EU).
描述: LT搬运叉车。由电池驱动,噪音 很小。由液压驱动和提升,伺服 机构操纵。
额载: 10吨
项目编号: LT276
适用于: 欧盟, 中国
描述: 轮毂运输架。用于提升和当地运输 2MW和3MW风力涡轮机轮毂.
额载: 30吨
项目编号: LT318
适用于: 欧盟, 中国
描述: 3.2 吨电池驱动式起重机。使用遥控 操作,能提升3.2吨重物提升高度 60毫米。
额载: 3.2吨
项目编号: LT518
适用于: 欧盟, 中国
描述: 法兰盘用吊钩。此吊钩用于塔筒 凸缘。此吊钩有一额外支撑梁来 降低起吊时凸缘表面的压力。
额载: 50吨
项目编号: LT135
适用于: 欧盟, 中国
DESCRIPTION: Vacuum yoke. Designed to lift and move glass-fiber section for wind turbine nacelle sections of different shapes and sizes. The yoke is flexible and can be turned and angled in many directions.
WLL: 360 kg/1 ton.
PROJECTNR.: LT233
APPROVED FOR: European Union (EU).
DESCRIPTION: Trolley. Designed for use with Samag carrier. The trolley is used for various loads of maximum 10 ton.
WLL: 10 ton.
PROJECTNR.: LT216
APPROVED FOR: European Union (EU).
DESCRIPTION: Hook with swivel bolt. A swivel hook for transportation of tower sections.
WLL: 45 ton.
PROJECTNR.: LT197
APPROVED FOR: European Union (EU).
DESCRIPTION: Forklift hook. Crane hook for use during transport of towers sections.
WLL: 34 ton.
PROJECTNR.: LT091
APPROVED FOR: European Union (EU).
DESCRIPTION: Lifting yoke for transmission NM1500-NM2750.