 |
DESCRIPTION:
RTG (Rubber Tyred Gantry) Crane.
WLL:
130 ton.
PROJECTNR.:
LT847
.
|
 |
DESCRIPTION:
Vacuum blade lifter. 8 vacuum pad electric powered blade lifter. Equalizer system to insure even load on all pads.
WLL:
10 ton.
PROJECTNR.:
LT811
APPROVED FOR:
European Union (EU).
.
|
 |
DESCRIPTION:
Wagon to move main shafts or other components that are placed in a trestle. The trestles are adjustable for different diameters.
WLL:
10 ton.
PROJECTNR.:
LT552
APPROVED FOR:
European Union (EU).
.
|
 |
DESCRIPTION:
Adjustable lifting yoke. Part of Liftra's broad range of lifting yokes.
WLL:
20 t.
PROJECTNR.:
LT504
APPROVED FOR:
European Union (EU).
.
|
 |
DESCRIPTION:
LT Carrier Gantry. Moves any component that can be lifted in one point. Can reach over a flatbed truck, to load and unload. Drives both in parallel mode in any direction - or in normal mode where the carrier turns around a line through the center of the carrier. Battery driven which makes the noise emission extremely low, and allows the carrier to drive inside the factory.
WLL:
90 ton.
PROJECTNR.:
LT494
APPROVED FOR:
European Union (EU).
.
|
 |
DESCRIPTION:
LT Carrier Gantry. Moves any component that can be lifted in 1 point. Can reach over a flatbed truck, to load and unload. Drives both in parallel mode in any direction - or in normal mode where the carrier turns around a line through the center of the carrier. Battery driven which makes the noise emission extremely low, and allows the carrier to drive inside the factory.
WLL:
80 ton.
PROJECTNR.:
LT194
APPROVED FOR:
European Union (EU).
.
|
 |
DESCRIPTION:
Bridge yoke. A bridge yoke that is designed for continuous rotation of a load.
WLL:
91 ton.
PROJECTNR.:
LT409
APPROVED FOR:
European Union (EU).
.
|
 |
DESCRIPTION:
Turning yoke. A turning yoke that is able to turn a load 180º.
WLL:
85 ton.
PROJECTNR.:
LT401
APPROVED FOR:
European Union (EU).
.
|
 |
DESCRIPTION:
Turning of hub 2MW and 3MW. Used to turn the 2MW hub and 3MW hub while fitted on transport frame. 180º turn of 2MW. 90º turn of 3MW.
WLL:
28 ton.
PROJECTNR.:
LT372
APPROVED FOR:
European Union (EU).
.
|
 |
DESCRIPTION:
Battery driven 3.2ton carrier which is capable of lifting 3.2 tonnes 60mm. Remote controlled.
WLL:
3.2 ton.
PROJECTNR.:
LT518
APPROVED FOR:
European Union (EU).
.
|
 |
DESCRIPTION:
Carrier for hub. Used for lifting and local transport of 2MW and 3MW hubs, for wind turbines.
WLL:
30 ton.
PROJECTNR.:
LT318
APPROVED FOR:
European Union (EU).
.
|
 |
DESCRIPTION:
LT Fork Carrier. The carrier is battery driven, which gives a very low noise emission. The traction and lift is hydraulic driven and has servo steering.
WLL:
10 ton.
PROJECTNR.:
LT276
APPROVED FOR:
European Union (EU).
.
|
 |
DESCRIPTION:
Vacuum yoke. Designed to lift and move glass-fiber section for wind turbine nacelle sections of different shapes and sizes. The yoke is flexible and can be turned and angled in many directions.
WLL:
360 kg/1 ton.
PROJECTNR.:
LT233
APPROVED FOR:
European Union (EU).
.
|
 |
DESCRIPTION:
Trolley. Designed for use with Samag carrier. The trolley is used for various loads of maximum 10 ton.
WLL:
10 ton.
PROJECTNR.:
LT216
APPROVED FOR:
European Union (EU).
.
|
 |
DESCRIPTION:
Hook with swivel bolt. A swivel hook for transportation of tower sections.
WLL:
45 ton.
PROJECTNR.:
LT197
APPROVED FOR:
European Union (EU).
.
|
 |
DESCRIPTION:
Hook for flange. The hook is designed to fit the flange of a tower. The hook has an extra support beam to decrease the surface pressure on the flange when lifting.
WLL:
50 ton.
PROJECTNR.:
LT135
APPROVED FOR:
European Union (EU).
.
|
 |
DESCRIPTION:
Forklift hook. Crane hook for use during transport of towers sections.
WLL:
34 ton.
PROJECTNR.:
LT091
APPROVED FOR:
European Union (EU).
.
|
 |
DESCRIPTION:
Lifting yoke for transmission NM1500-NM2750.
WLL:
50 ton.
PROJECTNR.:
LT011
APPROVED FOR:
European Union (EU).
.
|
